(1)保管脚手架的场地或仓库，应选择在清洁干净、排水通畅的地方，远离产生有害气体或粉尘的厂矿。在场地上要清除杂草及一切杂物，保持脚手架干净；
(1) The site or warehouse under the custodian's control should be located in a clean and smooth drainage area, away from factories and mines that produce harmful gases or dust. Weeds and all debris should be removed from the site and square tubes should be kept clean.
(2)在仓库里不得与酸、碱、盐、水泥等对脚手架有侵蚀性的材料堆放在一起。不同品种的钢管应分别堆放，防止混淆，防止接触腐蚀；
(2) No corrosive materials such as acid, alkali, salt and cement should be stacked together in the warehouse. Different kinds of steel pipes should be stacked separately to prevent confusion and contact corrosion.
(3)大型型钢、钢轨、辱钢板、大口径脚手架、锻件等可以露天堆放；
(3) Large sections, rails, disgraced steel plates, large caliber square pipes, forgings, etc. can be stacked in the open air;
(4)中小型型钢、盘条、钢筋、中口径脚手架、钢丝及钢丝绳等，可在通风良好的料棚内存放，但必须上苫下垫；
(4) Small and medium-sized steel, wire rods, reinforcing bars, medium-sized square pipes, steel wires and wire ropes can be stored in well-ventilated material shed, but they must be upholstered and underlayed.
(5)一些小型脚手架、薄钢板、钢带、硅钢片、小口径或薄壁脚手架、各种冷轧、冷拔钢管以及价格高、易腐蚀的金属制品，可存放入库；
(5) Some small square pipes, thin steel plates, steel strips, silicon steel sheets, small-caliber or thin-walled square pipes, various cold-rolled and cold-drawn steel pipes, as well as high-priced and corrosion-prone metal products, can be stored in storage;
(6)库房应根据地理条件选定，一般采用普通封闭式库房，即有房顶有围墙、门窗严密，设有通风装置的库房；
(6) Warehouses should be selected according to geographical conditions, generally using ordinary closed warehouses, that is, warehouses with roofs and walls, close doors and windows, and ventilation devices;
(7)库房要求晴天注意通风，雨天注意关闭防潮，经常保持适宜的储存环境
(7) Warehouses should pay attention to ventilation on sunny days and damp-proof closure on rainy days, so as to maintain an appropriate storage environment.
厂家总结移动脚手架配件焊接和施工注意事项移动脚手架配件焊接应采用手工电弧焊，在保证同等强度下也可采用其他方法。立杆与横杆焊接，螺杆、插管与底板的焊接，均必须采用周围焊接。焊接必须按照操作规范实施，焊接表面必须平整、光滑，不得有漏焊、焊穿、裂纹…
管理员
该内容暂无评论